30 July, 2019

What temperature does it use when making the silicone mold?

Silicon vulcanizing can be done at 120ºC. We have tested traditional resins without problems. Also 3D Printing resins from Formlabs, Envisiontech and Solus work perfectly and […]
30 July, 2019

Can it be wired for use in the Uk both for plug type and electric compatibility?

Yes. Consumption is 25A single phase.
30 July, 2019

About the size, the measurements say ‘reduced size’ does that mean the top comes off? Is the tall bottom section just for ease of use? What’s the total height?

All this information about machine layout, needed space, electrical and pneumatical requirements is available in the quotation.  
30 July, 2019

When using the machine, what if something goes wrong or needs to be repaired, do you need someone to fix it?

Some problems can be solved by the customer by following the basic steps in the instruction manuals. In addition, we are training a dedicated staff in […]
29 July, 2019

Do you offer a training on how to use/maintain the equipment?

Yes, with the purchase of the equipment it is possible to purchase a 2 days course to train in mould-making as well as in process and […]
29 July, 2019

Number of pieces in each mold?

Depending on the volume of the pieces, the usual for pieces of 25-32mm is 16 pieces per mold.
29 July, 2019

What is the life of the moulds before losing quality?

Between 300 and 500 shots.
29 July, 2019

The machine stores recipes. What does that mean?

The machine can store thousands of mould recipes. Each recipe stores the injection configuration of a given mold because it depends on the parts, their size, […]
29 July, 2019

How much electricity does the machine use?

The electrical power required is 5.75Kw (25A). The maximum consumption is made when the machine is melting the material.